Leica DM200 Microscope

The first hot plate stirrer with embedded Wi-Fi technology Wherever you are, VELP Ermes allows the r (more)eduction of routine operations thanks to the real-time control of your AREX-6 Connect PRO. Access your analyzes from PC, Pad or smartphone, to maximize the productivity and reproducibility of your reactions. Immediate notifications and alerts will allow you to always be informed and thanks to the remote interruption you will have total control of your processes. SAFETY FIRST AREX-6 Digital PRO is equipped with 2 independent temperature reading circuits that protect the instrument in the event of a malfunction of one of the two. If the probe is not inserted into the sample being analyzed, the instrument stops heating, showing a safety message on the display. AREX-6 Digital PRO is equipped with the most advanced technology and allows you to set the maximum temperature limit required for analyzes with specific temperatures. The Lock function prevents inadvertent changes to settings by locking the instrument. CerAlTop™, High Resistance The CerAlTop™ plate, made of aluminum alloy covered with a ceramic layer, guarantees a homogeneous and fast heat transfer over the entire surface. Furthermore, the thin ceramic layer protects the straightener from scratches and chemicals. CUTTING-EDGE THERMOREGULATION AREX-6 Digital PRO offers the best thermoregulation available. The PID thermoregulation system guarantees stable, fast temperature control with minimal overshoot. VTF and Pt100 probe allow accurate and precise temperature control. It is possible to choose between 2 different thermoregulation modes: - FAST: The set temperature is reached quickly. - FINE: The set temperature is reached slowly, minimizing overshoot. UNPRECEDENTED PERFORMANCE The brushless motor allows you to shake up to 20 liters at an adjustable speed from 30 to 1700 rpm. Thanks to the SpeedServo™ system, the speed is kept constant even when the viscosity varies. The Alnico magnet guarantees homogeneous agitation, even in the peripheral areas of the plate and a powerful magnetic coupling between motor and stir bar, a very important aspect when using accessories. MAXIMUM INSTRUMENT PROTECTION AREX-6 Digital PRO is an IP42 product designed to guarantee years of use and resistance in the laboratory. The structure and materials protect the internal parts of the instrument from possible damage. AREX-6 Digital PRO is guaranteed for 3 years. The silicone cover ensures further protection of the instrument from possible spills or splashes. Technical characteristics - Speed ​​regulation precision: 5 rpm. - Temperature regulation resolution: 1°C. - Connection for digital thermoregulators: VTF / VTF EVO. - Probe connection: Pt100. - Sample thermoregulation: ±0.5°C (VTF / VTF EVO) ±1°C (PT100). - Automatic reverse rotation: yes. - Probe detector: yes. - Lock function: yes. - Hot surface warning: on display. - Heating activation button: yes. NEW INTERFACE - EASY USE Bright LED display and intuitive icons. The icons will show you: probe or thermoregulator connection, heating activation, reaching the set temperature, timer activation and rotation reversal. The speed and temperature are set by the sensitive knobs, and are activated only after they are pressed. AREX-6 Digital PRO is equipped with an advanced menu that allows you to configure the instrument with the features that best suit the needs of the individual laboratory. INTEGRATED TIMER AND ROTATION REVERSE The central button allows you to set the timer from 1min to 99h59min. You can set the timer in 2 different modes: - Snap: The timer starts counting down as soon as a function is activated (stirring or heating). - SetP: The timer starts counting down as soon as the set temperature is reached. Furthermore, it is possible to set the rotation reversal at time intervals. CONNECTION TO THE ERMES CLOUD via WIFI Watch the videos to understand all the great possibilities of a latest generation laboratory, connected to Velp's Ermes cloud. VELP ERMES: FROM USER WORK MANAGEMENT TO DATA-RICH PROCESSES AREX-6 Connect PRO has built-in Wi-Fi technology to connect to the VELP Ermes cloud platform, the perfect solution for your Smart Lab. VELP Ermes allows the reduction of daily manual activities and repetitive operations thanks to real-time monitoring and control of your AREX-6 Connect PRO. Simply using a PC, smartphone or tablet you can access instrument data and working conditions anytime, anywhere. You will be able to protect your analysis data and share reports with your colleagues; receive immediate notifications of events and alarms remotely; record data and insights to improve productivity and reproducibility. Connecting your AREX-6 Connect PRO will be very easy, you can see it from the dedicated Ermes guide. You will also receive an exclusive level of support from VELP authorized service centers. ACCESSORIES OIL BATH AND HEATING MANTELS REPLACED WITH SPHERICAL CAPS The new Spherical Caps are the perfect solution for replacing oil baths and heating mantles. Furthermore, they adapt perfectly to both the 135 mm plate diameter and the shape of the tubes allowing a fast heat transfer from the plate to the tube. To increase protection and reduce thermal dispersion, VELP has designed the new PTFE Covers. GREATER VERSATILITY The MultiAlublock™ and the new MonoAlublock™ made of aluminium, are ideal for carrying out numerous stirring and heating analyses, reducing time and space in the laboratory. - MonoAlublock™ are the ideal solution for all those applications that require analysis in tubes of the same size. - MultiAlublock™ are modular and of different types to support various tube sizes. Thanks to their modularity, it is possible to choose the mix that best suits your needs.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Water bath from 25°C to 99.9°C for the laboratory The shaking water baths of the LAUDA Hydro series  (more)stir laboratory samples with linear or orbital motion, depending on the model. They are reliable instruments, ideal for any laboratory application, be it biological, medical or biochemical, guaranteeing a homogeneous distribution of the temperature. The integrated speed controller enables a load-independent, continuously adjustable stirring movement with soft start. The H 20 SW and H 20 SOW shaking water baths are equipped with a cooling coil as standard. The temperature range can be extended to a minimum of +10°C by connecting them to the domestic water supply or commercially available circulating chillers. Qualitative characteristics - Digital regulation of the temperature and indication via LED display - Load-independent, continuously variable stirring with soft start - Electronic monitoring of the thermoregulator functions, with two fuses for under/over temperature protection - Tank, frame, cover with condensation channel, shaking basket and heater in stainless steel - No dripping condensation – arched insulating lid to reduce heat loss and prevent condensation from dripping onto samples Operation All water baths come standard with a perforated pan and no racks are required. Flasks and containers can be placed directly on the bottom. The drain valve is located on the rear side. Controllers The control panel consists of a large, high-contrast TFT display and a membrane keyboard with four softkeys, protected against dirt and water drops. The menu will guide you on how to use the bain-marie correctly. Esempi applicativi - Bacteriological tests - Molecular biology - Demulsivity studies - Processing of chemical reactions - Thawing - Metallurgical analyses - Incubation of microbiological assays - heating reagents - Environmental studies - Food Processing (QC) - Water quality research - Cytochemistry Accessories available Water level regulator. The heating element is located directly under the sieve plate for even temperature distribution in the tank. Electronic monitoring of the temperature regulator. Two independently operating temperature fuses. Improved visual and audible alarms for increased sample safety. Control elements tilted back for increased splash protection and improved operating comfort. - Perforated plate to place the glassware directly on the bottom. - Fill mark max. to prevent overflows. - Easy removal of sieve plate for cleaning. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Limescale deposits inside the water bath can be removed with normal commercial descalers. The internal tray can be easily disassembled and lifted for quick and thorough cleaning. Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

A programmable laboratory oven with multiparametric microprocessor with the possibility of memorizin (more)g 4 programs with 8 segments each. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 300°C     4 storable programs with 8 segments each     Setting up ramps in °/min     2 shelves     pipe on the back for exhaust fumes with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of ° (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. Programmable OVEN STF-NR FALC

This listing is for a Elga UV Lamp LC118.Weight 100GDimensions: 20cmL x 9cmW x 5cmH

Ohaus Scout SKX1202 portable scale, with plate 170x140mm The OHAUS Scout scale, with its large backl (more)it LCD display and integrated educational software, is the ideal tool for use in the classroom. It offers premium quality overload protection, fast stabilization times, increased range, more connection options and stackable design - the most advanced learning weighing experience. Applications Weighing, density determination, weighing of moles Screen Liquid crystal display (LCD) with backlight Operation AC adapter (included) or 4 AA batteries (not included) Communication RS232, USB host, USB device, Ethernet or Bluetooth ™ (available as an accessory) Construction ABS housing, stainless steel pan, ABS draft shield (1mg model only), bottom weigh hook, transport lock, manual calibration lock switch, security slot Characteristics of the project Stability indicator, stackable design with storage lid included (excluding 1 mg model), mechanical and software overload / underload protection, low battery indicator, automatic shutdown, automatic tare, span calibration mass included on models with capacity up to 620 g Applications integrated in the scale: - Weighing: allows you to calculate the weight of the samples in the selected unit of measurement. - Density determination: calculation of the density of solids or liquids. Thanks to the integrated weigh below hook, it is possible to carry out tests for the specific gravity of objects that cannot be placed on the weighing pan. - Molar concentration: calculation of the mass of a sample and automatic conversion into the molar concentration.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOL (more)LOW

WTW OXI 3205 portable oximeter + Cellox 325 probe With Cellox 325 probe Waterproof dissolved oxygen  (more)measuring instrument Battery type: 4 x 1.5 V AA rechargeable batteries or 4 x 1.2 V NiMH rechargeable batteries Compensation and correction of atmospheric pressure: Automatic from 500 to 1100 mbar Protection class: IP 67 Screen display: backlit graphic LCD Dissolved O2 measuring range: 0.00 to 90 mg/L Dissolved O2 accuracy: ±0.5% Dissolved O2 resolution: 0.01, 0.1mg/L Temperature precision/accuracy: ±0.1°C Working/Operating/Use Temperature: -5 to 50°C Net weight: 2KG